COOLRITE Central Split/ Package Units are suitable for Floor, Wall or Ceiling installations with Standard Cabinet to serve even the more sophisticated architectural requirements.Units are compact, noiseless, have high efficiency, and a long-life.

COOLRITE Standard Unit Cabinet shall be made of zincor primered steel sheet coated with oven baked fine enamels. Concealed plenum cabinets shall be galvanized steel sheet. All units shall have the best protection against rust and corrosion.

Coil shall be made of brazed seamless copper tubes, expanded on aluminium fins, and tested at 28 bar (400psi). Aluminium fins are normally spaced at 12 fpi.

Fans shall be of radial propeller type, statically and dynamically balanced, with heavy gauge protective wire guard specially designed for large air flow with low static head pressure. Large diameter, low RPM, low noise, maintenance-free quality fan are used.

Blowers shallbe of the centrifugal forward-curved type, statically and dynamically balanced, all parts shall be provided with one or two blowers, according to the airhandling necessities.

Insulation All standard units shall ce thermally and accoustically insulated with polyrethane foam or asphalt coated fiber glass panels.

Collar for direct duct connection is provided in all units for outlet air only. For plenum a collar is also provided for inlet air.

Filter. slots are standard in all units, ½ inch disposable filter is normally provided, cleanable filters are also available on request.

Motors shall be water proof enclosed type with maintenance-free bearings or long life solid lubricant reserve, suitable for outdoor conditions. Single or multispeed single phase permanent split capacitor, or single speed 3 phase type, direct drive or belt drive arrangement. Motors are suitable for horizontal and vertical working positions, with internal built-in thermal protection, low speed, and low noise, in accordance with most European and American Electric Norms.